Configuring Dhcp Services On Ex4300 Switches (J-Web Procedure); Table 66: Dhcp Service Configuration Pages Summary For Ex4300 - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 65: DHCP Service Configuration Pages Summary (continued)
Field
Hexadecimal Client
Identifier

Configuring DHCP Services on EX4300 Switches (J-Web Procedure)

Table 66: DHCP Service Configuration Pages Summary for EX4300 Switches
Field
DHCP Groups
Group Name
Interfaces
126
Function
Specifies the name of the client, in hexadecimal
form, used by the DHCP server to index its
database of address bindings. The name must
be unique to the client within the subnet on
which the client resides.
On EX4300 switches, use the DHCP Configuration page to create DHCP pools and set
the DHCP parameters for them and to configure DHCP settings for existing DHCP pools
and static bindings.
To configure the DHCP services on EX4300 switches:
Select Configure > Services
1.
Access a DHCP Configuration page:
2.
To configure a DHCP pool for a subnet, click
To configure DHCP groups, click
To globally configure settings for existing DHCP pools and static bindings, click
Configure Global DHCP Parameters
Enter information into the DHCP Service Configuration pages as described in
3.
Table 66 on page 126
To apply the configuration, click
4.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Function
Specifies the name of the group.
Family inet interface is listed , only if it is already
configured with family inet.
Your Action
Type a client identifier in hexadecimal form.
> DHCP
in the DHCP Pools box.
Add
in the DHCP Groups box.
Add
.
.
OK
Commit Options
Your Action
Enter the name of the group.
Select the interface for the specific group.
Copyright © 2017, Juniper Networks, Inc.
> . See Using
Commit