Defining Cos Classifiers (J-Web Procedure); Table 31: Drop Profiles Configuration Parameters - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Table 31: Drop Profiles Configuration parameters

Field
Drop Profile Name
Drop profile graph
Drop profile values
Release History Table
Related
Documentation

Defining CoS Classifiers (J-Web Procedure)

60
—Adds a drop profile. Enter information into the drop profiles page as described
Add
in Table 31 on page 60.
Edit —Modifies an existing drop file. Enter information into the drop profiles page as
described in Table 31 on page
—Deletes an existing drop profile.
Delete
Function
Specifies the name for a drop profile.
Specifies the drop profile graph type
Specifies values for the following two
parameters of the drop profile: the queue fill
level and the drop probability.
The queue fill level represents a percentage of
the memory used to store packets in relation
to the total amount that has been allocated for
that specific queue.
The drop probability is a percentage value that
correlates to the likelihood that an individual
packet is dropped from the network.
Release Description
14.1X53-A2 J-Web Application package Release 14.1X53-A2 does not support
Class of Service (CoS) on EX4600 switches.
Monitoring CoS Drop Profiles on page 226
Example: Configuring CoS on EX Series Switches
NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support Class of
Service on EX4600 switches.
60.
Your Action
Type the name.
Select one: Segmented
To add new values:
1. Click Add .
2. Enter the fill level.
3. Enter the drop probability.
4. Click .
OK
To edit an existing value, click
the fill level and drop probability.
To delete a value, select it and click
Copyright © 2017, Juniper Networks, Inc.
or Interpolated .
and modify
Edit
.
Delete