Rebooting Or Halting The Ex Series Switch (J-Web Procedure) - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Related
Documentation

Rebooting or Halting the EX Series Switch (J-Web Procedure)

56
% openssl req –x509 –nodes –newkey rsa:1024 –keyout filename.pem -out filename.pem
where is the name of a file in which you want the SSL certificate to be
filename
written—for example, my-certificate
When prompted, type the appropriate information in the identification form. For
2.
example, type for the country name.
US
Display the contents of the file that you created.
3.
cat my-certificate.pem
You can use the J-Web Configuration page to install the SSL certificate on the switch.
To do this, copy the file containing the certificate from the BSD or Linux system to the
switch. Then open the file, copy its contents, and paste them into the Certificate box on
the J-Web Secure Access Configuration page.
You can also use the following CLI statement to install the SSL certificate on the switch:
[edit]
user@switch# set security certificates local my-signed-cert load-key-file my-certificate.pem
Configuring Management Access for the EX Series Switch (J-Web Procedure) on
page 52
Security Features for EX Series Switches Overview
You can use the J-Web interface to schedule a reboot or to halt the switching platform.
To reboot or halt the switching platform by using the J-Web interface:
In the J-Web interface, select
1.
Select one:
2.
—Reboots the switching platform immediately.
Reboot Immediately
Reboot in number of minutes
now that you specify.
Reboot when the system time is hour:minute
time that you specify, on the current day. You must select a 2-digit hour in 24-hour
format and a 2-digit minute.
Halt Immediately — Stops the switching platform software immediately. After the
switching platform software has stopped, you can access the switching platform
through the console port only.
(Optional) In the Message box, type a message to be displayed to any users on the
3.
switching platform before the reboot occurs.
.
Maintain > Reboot .
—Reboots the switch in the number of minutes from
—Reboots the switch at the absolute
Copyright © 2017, Juniper Networks, Inc.