Configuring Poe (J-Web Procedure); Configuring Poe On Ex2200, Ex2200-C, Ex3200, Ex3300, Ex4200, And Ex4300 Switches - Juniper EX Series User Manual

Release History Table
Related
Documentation

Configuring PoE (J-Web Procedure)

Configuring PoE on EX2200, EX2200-C, EX3200, EX3300, EX4200, and EX4300 Switches

Copyright © 2017, Juniper Networks, Inc.
Release Description
14.1X53-A2 For J-Web Application package Release 14.1X53-A2, on EX4600 switches
the maximum number of link aggregation group (LAG) devices supported
is 1000.
Configuring Aggregated Ethernet Links (CLI Procedure)
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Verifying the Status of a LAG Interface
Configuring Aggregated Ethernet LACP (CLI Procedure)
Understanding Aggregated Ethernet Interfaces and LACP
NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support Power over
Ethernet (PoE) on EX4600 switches.
PoE (and PoE+) ports supply electric power over the same ports that are used to connect
network devices to EX Series switches. You can use these ports to plug in devices that
require both network connectivity and electric power, such as VoIP phones, wireless
access points, and some IP cameras. Using the Power over Ethernet (PoE) Configuration
page in the J-Web interface, you can modify the settings of all interfaces that are
PoE-enabled.
This topic includes:
Configuring PoE on EX2200, EX2200-C, EX3200, EX3300, EX4200, and EX4300
Switches on page 119
Configuring PoE on EX6200 Switches on page 120
To configure PoE:
Select >
Configure Power over Ethernet
1.
The page displays a list of all PoE-capable interfaces except uplink ports. Specific
operational details about an interface are displayed in the Details section of the page.
The details include the PoE operational status and port class.
.
Chapter 9: Interfaces
119