Monitoring Chassis Information - Juniper EX Series User Manual

Release History Table
Related
Documentation

Monitoring Chassis Information

Purpose
Action
Meaning
Copyright © 2017, Juniper Networks, Inc.
Release Description
14.1X53 Starting in Junos OS Release 14.1X53, a Raw Report can be generated from
the log messages being loaded in the Events Detail table.
14.1X53 Starting in Junos OS Release 14.1X53, a Formatted Report can be generated
from event log messages being loaded in an Events Detail table.
Checking Active Alarms with the J-Web Interface on page 186
Understanding Alarm Types and Severity Levels on EX Series Switches on page 30
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to view chassis properties such as general switch
information, temperature and fan status, and resource information for the EX Series
switch.
To view chassis properties in the J-Web interface, select
. For an EX8200 Virtual Chassis configuration, select the Virtual Chassis
Information
member from the list.
To view chassis properties in the CLI, enter the following commands:
show chassis environment
show chassis fpc
show chassis hardware
Table 87 on page 192 gives information about the key output fields for chassis information.
NOTE: For an EX2200, EX2200-C, EX3200, or EX4500 switch or an EX4200,
EX4300, or EX4550 standalone switch, the FPC slot number refers to the
switch itself and is always 0. In a Virtual Chassis configuration, the FPC slot
number refers to the member ID.
Chapter 16: Monitoring Tasks
> >
Monitor System View Chassis
191