Table 51: Advanced Options For Terms - Juniper EX Series User Manual

Table 50: Create a New Term (continued)
Field Function
More Specifies advanced configuration options for
the filter.

Table 51: Advanced Options for Terms

Table
ICMP Type
ICMP Code
DSCP
Precedence
IP Options
Interface
Ether type
NOTE: This option is not
supported on EX4300
switches.
Copyright © 2017, Juniper Networks, Inc.
Function
Specifies the ICMP packet type field. Typically, you specify this
match condition in conjunction with the protocol match
condition to determine which protocol is being used on the
port.
Specifies more specific information than the ICMP type.
Because the value's meaning depends upon the associated
ICMP type, you must specify
icmp-type
The keywords are grouped by the ICMP type with which they
are associated.
Specifies the Differentiated Services code point (DSCP). The
DiffServ protocol uses the type-of-service (ToS) byte in the IP
header. The most significant six bits of this byte form the DSCP.
Specifies the IP precedence.
NOTE: The IP precedence and the DSCP number cannot be
specified together for the same term.
Specifies the presence of the options field in the IP header.
Specifies the interface on which the packet is received.
Specifies the Ethernet type field of a packet.
NOTE: This option is not applicable for a routing filter.
Chapter 7: Routing Policies and Packet Filtering Configuration
Your Action
Select the match conditions as specified in
Select the packet action for the term as specified in
Table 51 on page 93.
along with
icmp-code.
Table 51 on page 93.
Your Action
Select the option from the
list.
Select a value from the list.
Select the DSCP number
from the list.
Select the option from the
list.
Select the option from the
list.
Select the interface from the
list.
Select a value from the list.
93