Configuring Static Routing (J-Web Procedure); Table 74: Static Routing Configuration Summary - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 73: Edit RIP Global Settings (continued)
Field Function
World Readable Specifies whether the trace file can be read by any user or
not.
Flags Specifies the tracing operation to perform.
Related
Documentation

Configuring Static Routing (J-Web Procedure)

Table 74: Static Routing Configuration Summary

Field
Default Route
148
Monitoring RIP Routing Information on page 212
Layer 3 Protocols Supported on EX Series Switches
You can use the J-Web interface to configure static routes for EX Series switches.
To configure static routes:
Select Configure > Routing
1.
of the configured routes.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Click one of the following options:
2.
Add —To configure a route. Enter information into the routing page as described in
Table 74 on page 148.
—To modify an existing route. Enter information into the routing page as
Edit
described in Table 74 on page
Delete —To delete an existing route.
Function
Your Action
Select
True
file.
Select
False
to read the file.
Select a value from the list.
> Static Routing . The Static Routing page displays details
Commit Options
148.
Your Action
Copyright © 2017, Juniper Networks, Inc.
to allow any user to read the
to disallow all users being able
> Commit . See Using