Table 70: Ospf Routing Configuration Summary - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Table 70: OSPF Routing Configuration Summary

Field Function
General tab
Area Id Uniquely identifies the
area within its AS.
140
Select >
1. Configure Routing
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Click one of the following options:
2.
Add —Adds an OSPF area. Enter information into the configuration page as described
in Table 70 on page 140.
—Modifies an existing OSPF area. Enter information into the configuration page
Edit
as described in Table 70 on page
—Deletes an existing OSPF area.
Delete
To modify OSPF global settings, click
3.
Table 71 on page 142.
To disable OSPF, click Disable
4.
Your Action
Type a 32-bit numeric identifier for the area. Type an integer or select and edit
the value.
If you enter an integer, the value is converted to a 32-bit equivalent. For example,
if you enter 3, the value assigned to the area is
> .
OSPF
Commit Options
140.
. Enter information as described in
Edit
.
Copyright © 2017, Juniper Networks, Inc.
> Commit . See Using
.
0.0.0.3