Table 50: Create A New Term - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 49: Create a New Filter (continued)
Field Function
VLAN Associations Specifies the VLANs with which the filter is
associated.
NOTE:
associated with ports only, this section is not
displayed for a router firewall filter.

Table 50: Create a New Term

Field Function
Term Name Specifies the name of the term.
Protocols Specifies the protocols to be associated with
the term.
Source Specifies the source IP address, MAC
address, and available ports.
NOTE: MAC address is specified only for port
or VLAN filters.
Destination Specifies the destination IP address, MAC
address, and available ports.
NOTE: MAC address is specified only for port
or VLAN filters.
Action Specifies the packet action for the term.
92
Because router firewall filters can be
Your Action
1. Click .
Add
2. Select the direction: Ingress or Egress.
3. Select the VLANs.
4. Click .
OK
Your Action
Enter a name.
1. Click .
Add
2. Select the protocols.
3. Click .
OK
To specify the IP address, click
address.
To specify the MAC address, click
MAC address.
To specify the ports (interfaces), click
the port number.
To delete the IP address, MAC address, or port details, select
it and click .
Remove
To specify the IP address, click
address.
To specify the MAC address, click
MAC address.
To specify the ports (interfaces), click
the port number.
To delete the IP address, MAC address, or port details, select
it and click .
Remove
Select one of the following options:
Accept
Discard
Copyright © 2017, Juniper Networks, Inc.
Add > IP and enter the IP
> and enter the
Add MAC
> and enter
Add Ports
> and enter the IP
Add IP
> and enter the
Add MAC
> and enter
Add Ports