Routing Policies And Packet Filtering Configuration; Configuring Routing Policies (J-Web Procedure) - Juniper EX Series User Manual

CHAPTER 7
Routing Policies and Packet Filtering
Configuration

Configuring Routing Policies (J-Web Procedure)

Copyright © 2017, Juniper Networks, Inc.
Configuring Routing Policies (J-Web Procedure) on page 85
Configuring Firewall Filters (J-Web Procedure) on page 90
NOTE: This topic applies only to the J-Web Application package.
All routing protocols use the Junos OS routing table to store the routes that they learn
and to determine which routes are advertised in the protocol packets. Routing policy
allows you to control which routes the routing protocols store in and retrieve from the
routing table on the routing device.
To configure routing policies for an EX Series switch using the J-Web interface:
Select Configure > Routing
1.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Click one of the following options:
2.
Global Options —Configures global options for policies. Enter information into the
configuration page as described in
—Configures a new policy. Select
Add
enter information into the configuration page as described in
Select Clone to create a copy of an existing policy.
—Edits an existing policy. To modify an existing term, enter information into the
Edit
configuration page as described in
> Policies .
Commit Options
Table 47 on page
and specify a policy name. To add terms,
New
Table 48 on page
> Commit . See Using
86.
Table 48 on page
87.
87.
85