Table 33: Cos Value Aliases Configuration Fields - Juniper EX Series User Manual

Table 33: CoS Value Aliases Configuration Fields

Field Function
Code point name Specifies the name for a code-point—for example,
af11
Code point type Specifies a code-point type. The code-point type
can be DSCP or IP precedence.
Code point value bits Specifies the CoS value for which an alias is
defined.
Changing this value alters the behavior of all
classifiers that refer to this alias.
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
To define CoS code-point aliases:
Select >
Configure Class of Service
1.
NOTE: After you make changes to the configuration on this page, you
must commit the changes immediately for them to take effect. To commit
all changes to the active configuration, select
See "Using the Commit Options to Commit Configuration Changes (J-Web
Procedure)" on page 31
Click one of the following options:
2.
—Adds a code-point alias. Enter information into the code point alias page as
Add
described in Table 33 on page
Edit —Modifies an existing code-point alias. Enter information into the code point
alias page as described in
—Deletes an existing code-point alias.
Delete
Table 33 on page 63 describes the related fields.
or be .
Defining CoS Code-Point Aliases (CLI Procedure)
Monitoring CoS Value Aliases on page 227
Example: Configuring CoS on EX Series Switches
Chapter 5: Class of Service Configuration
>
CoS Value Aliases
for details about all commit options.
63.
Table 33 on page 63.
Your Action
Enter a name.
Select a value.
To specify a CoS value, type it in the appropriate
format:
For DSCP CoS values, use the format xxxxxx,
where x is 1 or 0—for example,
For IP precedence CoS values, use the format
xxx, where x is 1 or 0—for example,
.
>
Commit Options Commit
.
101110
.
111
.
63