Juniper EX Series User Manual page 227

Table 93: Summary of DHCP Output Fields (continued)
Field Values
Lease Date and time the lease expires, or
Expires that do not expire.
Pools tab
Pool Name Subnet on which the IP address pool is defined.
Low Lowest address in the IP address pool.
Address
High Highest address in the IP address pool.
Address
Excluded Addresses excluded from the address pool.
Addresses
Clients tab
Interface Name of the logical interface.
Name
Hardware Vendor identification.
Address
Status State of the client binding.
Address IP address obtained from the DHCP server.
Obtained
Update Indicates whether server update is enabled.
Server
Lease Date and time the lease was obtained.
Obtained
Lease Date and time the lease expires.
Expires
Renew Reacquires an IP address from the server for the
interface. When you click this option, the command
sends a discover message if the client state is INIT
and a renew request message if the client state is
BOUND. For all other states it performs no action.
Release Clears other resources received earlier from the server,
and reinitializes the client state to INIT for the
particular interface.
Conflicts tab
Detection Date and time the client detected the conflict.
Time
Copyright © 2017, Juniper Networks, Inc.
Additional Information
for leases
never
Chapter 16: Monitoring Tasks
207