Security And Management Configuration; Configuring 802.1X Authentication (J-Web Procedure) - Juniper EX Series User Manual

CHAPTER 6

Security and Management Configuration

Configuring 802.1X Authentication (J-Web Procedure)

Copyright © 2017, Juniper Networks, Inc.
Configuring 802.1X Authentication (J-Web Procedure) on page 73
Configuring LLDP (J-Web Procedure) on page 76
Configuring Port Mirroring to Analyze Traffic (J-Web Procedure) on page 77
Configuring Port Security (J-Web Procedure) on page 80
NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support 802.1X
authentication on EX4600 switches.
To configure 802.1X settings on an EX Series switch using the J-Web interface:
Select >
Configure Security
1.
The 802.1X screen displays a list of interfaces, whether 802.1X security has been
enabled, and the assigned port role.
When you select an interface, the
802.1X details for that interface.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Select one of the following options:
2.
> .
802.1X
Details of 802.1x configuration on port
Commit Options
section displays
> . See Using
Commit
73