Table 72: Rip Routing Configuration Summary - Juniper EX Series User Manual

Table 72: RIP Routing Configuration Summary

Field
General tab
Routing instance name
Preference
Metric Out
Update interval
Route timeout
Policies tab
Import Policy
Copyright © 2017, Juniper Networks, Inc.
Select >
1. Configure Routing
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Click one of the following options:
2.
Add —Configures a RIP instance. Enter information into the RIP Configuration page
as described in Table 72 on page
—Modifies an existing RIP instance. Enter information into the configuration
Edit
page for RIP as described in
—Deletes an existing RIP instance.
Delete
To modify RIP global settings, click
4.
described in Table 73 on page
Function
Specifies a name for the routing instance.
Specifies the preference of external routes
learned by RIP as compared to those learned
from other routing protocols.
Specifies the metric value to add to routes
transmitted to the neighbor.
Specifies an update time interval to periodically
send out routes learned by RIP to neighbors.
Specifies the route timeout interval for RIP.
Applies one or more policies to routes being
imported into the local routing device from the
neighbors.
Chapter 11: Configuring Layer 3 Protocols
> .
RIP
Commit Options
145.
Table 72 on page 145.
. Enter information in the configuration as
Edit
146.
Your Action
Type or select and edit the name.
Type or select and edit the value.
Type or select and edit the value.
Type or select and edit the value.
Type or select and edit the value.
Click to add an import policy.
Add
Click Move up
selected policy up or down the list of policies.
Click
Remove
> Commit . See Using
or Move down to move the
to remove an import policy.
145