Monitoring Cos Scheduler Maps - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 109: Summary of Key CoS Rewrite Rules Output Fields (continued)
Field
CoS Value Type
Index
Forwarding Class
Loss Priority
Rewrite CoS Value To
Related
Documentation

Monitoring CoS Scheduler Maps

Purpose
Action
Meaning
232
Values
Rewrite rule type:
—For IPv4 DiffServ traffic.
dscp
—For MPLS traffic.
exp
ieee-802.1 —For Layer 2 traffic.
inet-precedence —For IPv4 traffic.
Internal index for this particular rewrite rule.
Forwarding class that is used to determine
CoS values for rewriting in combination with
loss priority.
Loss priority that is used to determine CoS
values for rewriting in combination with
forwarding class.
Value that the CoS value is rewritten to.
Defining CoS Rewrite Rules (CLI Procedure)
Defining CoS Rewrite Rules (J-Web Procedure) on page 67
Example: Configuring CoS on EX Series Switches
NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support Class of
Service (CoS) on EX4600 switches.
Use the monitoring functionality to display assignments of CoS forwarding classes to
schedulers.
To monitor CoS scheduler maps in the J-Web interface, select
> Scheduler Maps .
To monitor CoS scheduler maps in the CLI, enter the following CLI command:
show class-of-service scheduler-map
Table 110 on page 233 summarizes key output fields for CoS scheduler maps.
Additional Information
To display forwarding classes, loss priorities,
and rewritten CoS values, click the plus sign
(+).
Rewrite rules are applied to CoS values in
outgoing packets based on forwarding class
and loss priority setting.
>
Monitor Class of Service
Copyright © 2017, Juniper Networks, Inc.