Monitoring Switch Control Traffic - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 89: Summary of System Process Information Output Fields (continued)
Field
Name
State
CPU Load
Memory Utilization
Start Time
Related
Documentation

Monitoring Switch Control Traffic

Purpose
Action
Meaning
196
Values
Owner of the process.
Current state of the process.
Percentage of the CPU that is being used by the
process.
Amount of memory that is being used by the
process.
Time of day when the process started.
Monitoring System Properties on page 193
For more information about show system properties command, see show system
uptime.
NOTE: This topic applies only to the J-Web Application package.
Use the packet capture feature when you need to quickly capture and analyze switch
control traffic on a switch. The packet capture feature allows you to capture traffic
destined for or originating from the Routing Engine.
To use the packet capture feature in the J-Web interface, select
.
Capture
To use the packet capture feature in the CLI, enter the following CLI command:
monitor traffic
You can use the packet capture feature to compose expressions with various matching
criteria to specify the packets that you want to capture. You can decode and view the
captured packets in the J-Web interface as they are captured. The packet capture feature
does not capture transient traffic.
Additional Information
Troubleshoot >
Copyright © 2017, Juniper Networks, Inc.
Packet