Configuring Date And Time For The Ex Series Switch (J-Web Procedure); Table 28: Date And Time Settings - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Configuring Date and Time for the EX Series Switch (J-Web Procedure)

Table 28: Date and Time Settings

Time
Time Zone
Set Time
Related
Documentation
50
NOTE: This topic applies only to the J-Web Application package.
To configure date and time on an EX Series switch:
Select >
Configure System Properties
1.
To modify the information, click
2.
as described in Table 28 on page
Click one of the following options:
3.
To apply the configuration, click
To cancel your entries and return to the System Properties page, click
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Function
Identifies the timezone that the switching
platform is located in.
Synchronizes the system time with that
of the NTP server. You can also manually
set the system time and date.
J-Web User Interface for EX Series Switches Overview on page 3
> .
Date & Time
. Enter information into the Edit Date & Time page
Edit
50.
OK .
Commit Options
Your Action
Select the appropriate time zone from
the list.
To immediately set the time, Click one
of the following options:
Synchronize with PC time
synchronizes the time with that of the
PC.
NTP Servers
request to the NTP server and
synchronizes the system time.
Manual —A pop-up window allows you
to select the current date and time
from a list.
Copyright © 2017, Juniper Networks, Inc.
.
Cancel
> . See Using
Commit
—The switch
—The switch sends a