Table of Contents
Advertisement
Caution:
If you are not installing a redundant power supply in the slot, be sure to keep the metal cover
plate in place over the slot. Removing the cover plate impedes airflow and proper cooling of the
unit.
Warning:
Disconnecting the power cord is the only way to turn off power to this device. Allow at least 30
seconds for the this device to fully power down before restoring power. Otherwise, this device
might produce a core file during the reset leading to an extra delay during boot time.
Danger:
Use only power cords that have a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the
switch can result in excessive emissions.
Warning:
The lithium battery is not field replaceable. It should be removed and replaced by authorized
personnel only. Contact Avaya Technical Support for assistance if the battery requires
replacement.
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source.
Technical specifications
The following table provides the technical specifications for the individual switches in this series.
Ensure that the area where you install the switch and where it operates meets these requirements.
Warning:
To avoid bodily injury from hazardous electrical shock and current, never remove the top of the
device. No user-serviceable components are inside.
Table 1: Physical specifications
Height
Width
Depth
Weight of VSP 8284XSQ
(EC8200x01-E6)
Weight of spare AC power
supply unit (EC8005x01-E6)
June 2015
3.5 in. (88.9 mm) - 2U
17.5 in. (444.5 mm) - 19" rack mountable
19.68 in. (500 mm)
32.1 lb (14.56 kg)
1.9 lb (0.862 kg)
Installation Job Aid for Avaya Virtual Services Platform 8200
Table continues...
2
Advertisement
Table of Contents
