Output Jogger Unit (B703)
1.
Turn the main machine switch off.
2.
Disconnect the finisher from the main frame.
3.
Use the flat head of a screwdriver to remove the left upper cover [A].
4.
Remove the cover plate [A] (
5.
While holding the jogger unit with the connector on the left, put the hooks on the frame
of the jogger unit [A] into the holes in the left and right side of the finisher frame.
6.
Connect connector [B] to the socket (
7.
Attach the jogger unit [C] to the finisher (
8.
Reattach the jogger unit cover [D] to the jogger unit (
G188/G189
x 2). Keep the screws.
x 1).
x 2).
2-46
x 2).
SM