Ricoh G188 Service Manual page 689

If the finisher runs out of staples during a print and staple job, then the job is counted at
the time the error occurs.
For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying
the number of sets of copies by the number of pages scanned. (One duplex page
counts as 2.)
The first test print and subsequent test prints to adjust settings are added to the number
of pages of the copy job (SP 8072).
When printing the first page of a job from within the document server screen, the page is
counted.
8 381 T:Total PrtPGS
8 384 P:Total PrtPGS
8 387 O:Total PrtPGS
When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
When several documents are merged for a print job, the number of pages stored are
counted for the application that stored them.
These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports,
etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
LSize PrtPGS
8 391
These SPs count pages printed on paper sizes A3/DLT and larger.
SM Appendix
*CTL These SPs count the number of pages printed
by the customer. The counter for the
*CTL
application used for storing the pages
increments.
[0 to 9999999/ 0 / 1]
*CTL
*CTL [0 to 9999999/ 0 / 1]
8-277
Engine Service Mode
G188/G189