Ricoh G188 Service Manual page 470

Engine Service Mode
201 Area5: Y
202 Area6: Y
203 Area7: Y
204 Area8: Y
205 Area9: Y
206 Area10: Y
207 Area11: Y
208 Area12: Y
[Area Shad. Correct. Setting] FA
Adjusts the area correction value for each LD power.
The main scan is divided into 16 areas. However, the image areas are limited
from area 1 to area 14.
2152
For BK and Magenta, area 1 is at the rear side of the machine (left side of the
image) and area 14 is at the front side of the machine (right side of the image).
For Cyan and Yellow, area 1 is at the front side of the machine (right side of the
image) and area 14 is at the rear side of the machine (left side of the image).
001 Area 0: Bk
002 Area 1: Bk
003 Area 2: Bk
004 Area 3: Bk
005 Area 4: Bk
006 Area 5: Bk
007 Area 6: Bk
008 Area 7: Bk
009 Area 8: Bk
G188/G189
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
Not used
*ENG
*ENG
*ENG This is for the synchronizing detection
board.
*ENG
[50 to 150 / 100 / 1 %/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
8-58 SM Appendix