Ricoh G188 Service Manual page 515

[OHP: Bias: FC]
2608
Adjusts the current for the paper transfer roller for OHP in full color mode.
001 Paper Transfer
[OHP: Paper Size Correction]
2611
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2603 and SP2608 are multiplied by these SP values.
001 Paper Transfer: S1
002 Paper Transfer: S2
003 Paper Transfer: S3
004 Paper Transfer: S4
005 Paper Transfer: S5
[OHP: Leadin Edge Correction] OHP: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2621
edge in each mode. SP2603 and SP2608 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2622.
001 Paper Transfer
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2601 is multiplied by these SP values.
2621
The paper leading edge area can be adjusted with SP2622.
SM Appendix
*ENG [0 to 250 / 15 / 1 –μA /step]
[100 to 600 / 100 / 5%/step]
*ENG
S1 size ≥ 297 mm (Paper width)
[100 to 600 / 140 / 5%/step]
*ENG
297 mm ≥ S2 size ≥ 275 mm (Paper width)
[100 to 600 / 200 / 5%/step]
*ENG
275 mm ≥ S3 size ≥ 210 mm (Paper width)
[100 to 600 / 260 / 5%/step]
*ENG
210 mm ≥ S4 size ≥ 148 mm (Paper width)
[100 to 600 / 330 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG [0 to 400 / 100 / 5%/step]
8-103
Engine Service Mode
G188/G189