Ricoh G188 Service Manual page 602

Engine Service Mode
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [0 to 5]
4th digit: The day of the week. [0 to 7 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
The 7th and 8 digits must be set to "00".
The digits are counted from the left.
Make sure that SP5-307-1 is set to "1".
[Access Control]
5401
When installing the SDK application, SAS (VAS) adjusts the following
settings. DFU
Extend Certification
Detail
162
Selects the log out type for the extend authentication device.
200 SDK1 UniqueID
SDK1 Certification
201
Method
210 SDK2 UniqueID
SDK2 Certification
211
Method
220 SDK3 UniqueID
SDK3 Certification
221
Method
230 SDK certification device
Detail Option
240 Enalbes or disables the log out confirmation option.
Bit 0: Log out confirmation option
0: Enable (default), 1: Disable
G188/G189
Bit 0: Log-out without an IC card
*CTL 0: Not allowed (default)
1: Allowed
*CTL
*CTL
*CTL
"SDK" is the "Software Development Kit".
This data can be converted from SAS
*CTL
(VAS) when installed or uninstalled. (DFU)
*CTL
*CTL
*CTL
*CTL -
8-190 SM Appendix