Ricoh G188 Service Manual page 614

Engine Service Mode
[1 to 100 / 60 / 1 second /step]
Port 80 Enable
011 Enables/disables access via port 80 to the SOAP method.
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
RFU (Remote Frimware Update) Timing
Selects the RFU timing.
013
[0 or 1 / 1 / – ]
0: RFU is executed whenever update request is received.
1: RFU is executed only when the machine is in the sleep mode.
RCG – C Registed
021 This SP displays the Embedded RC Gate installation end flag.
0: Installation not completed
1: Installation completed
RCG – C Regist Detail
This SP displays the Embedded RC Gate installation status.
022
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Type (N/M)
This SP displays and selects the Embedded RC Gate connection method.
023
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
Cert. Expire Timing DFU
061
Proximity of the expiration of the certification.
Use Proxy
062
This SP setting determines if the proxy server is used when the machine
G188/G189 8-202 SM Appendix