Ricoh G188 Service Manual page 395

Jam Code
Display
SP
Finisher Stopper
7504 148
Motor (B793)
Finisher Entrance:
7504 191
EUP (B805)
Finisher Proof Exit:
7504 192
EUP (B805)
Finisher Shift Tray
7504 193
Exit: EUP (B805)
Finisher Stapler Exit:
7504 194
EUP (B805)
Finisher Exit: EUP
7504 195
(B805)
7504 196 Finisher Staple: EUP
SM Appendix
Description
turn on after the lower clamp roller has
returned to its home position.
Stopper S HP sensor does not turn off
after the stopper S has moved from its
home position.
Stopper S HP sensor does not turn on
after the stopper S has returned to its
home position.
Paper does not reach the finisher
entrance sensor or stays at the finisher
entrance sensor.
Paper does not reach the proof tray exit
sensor or stays at the proof tray exit
sensor.
Paper does not reach the upper tray exit
sensor or stays at the upper tray exit
sensor.
Stapling tray paper sensor does not turn
on after the finisher entrance sensor has
turned on.
Stapling tray paper sensor does not turn
off after it has turned on.
Upper tray exit sensor does not turn on
while the stack feed-out belt is turned
on.
Upper tray exit sensor does not turn off
after the stack feed-out belt has
returned to its home position.
Not used
6-7
Jam Detection
LCD
Display
R7-R11
R1-R4
R1-R4
R1-R4
R5-R8
R8-R12
-
G188/G189