Table of Contents
Advertisement
Service Program Mode
3.
To select a bit switch, press the " / " keys.
4.
Push the OK key.
5.
Set the value with these keys:
[Left] [Right]: Moves the cursor to one of the adjacent bits.
[Up] [Down]: Changes a bit between "0" and "1".
[Escape]: Goes out of the program without saving changes.
[OK]: Goes out of the program and saves changes.
6.
Push the "Escape" key one or more times until the menu "SP mode (Service)" is
shown.
7.
Select "End" and push the OK key.
G188/G189
5-4
SM
Advertisement
Chapters
Table of Contents
Troubleshooting
