Ricoh G188 Service Manual page 642

Engine Service Mode
001 Switch Charge Mode
5907 [Plug & Play Maker/Model Name]
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
5930 [Meter Click Ch.] Meter Click Charge
5930 001 Meter Click Ch.
5930 010 PCU
5930 014 Mid Trans Unit
5930 016 Fusing Unit.
G188/G189
*ENG
[0 to 2 / 0 / 1/step]
Enables or disables the Meter Charge
mode. When enabling the Meter Charge
mode, the "Counter" menu is added to the
*EGB
user menu.
[0 or 1 / 0 / -]
0: OFF, 1: ON
Displays or does not display the end
display for the PCU. This SP is activated
*EGB only when the SP5930-001 is set to "1".
[0 or 1 / 1 / -]
0: OFF, 1: ON
Displays or does not display the end
display for the image transfer belt unit.
This SP is activated only when the
*EGB
SP5930-001 is set to "1".
[0 or 1 / 1 / -]
0: OFF, 1: ON
Displays or does not display the end
display for the fusing unit. This SP is
*EGB activated only when the SP5930-001 is set
to "1".
[0 or 1 / 1 / -]
8-230 SM Appendix