Ricoh G188 Service Manual page 635

Target (2: HDD 3: SD)
002 Selects the storage device to save debug logs information when the
conditions set with SP5-858 are satisfied.
[ 2 to 3 / 2 / 1 /step]
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
005
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card.
Save to SD Card
006
Saves the debug log of the input SC number in memory to the SD card.
009 Copy HDD to SD Card (Latest 4 MB)
010 Copy HDD to SD Card (Latest 4 MB Any Key)
011 Erase HDD Debug Data
012 Erase SD Card Debug Data
013 Free Space on SD Card
014 Copy SD to SD (Latest 4 MB)
015 Copy SD to SD (Latest 4 MB Any Key)
016 Make HDD Debug
017 Make SD Debug
[Debug Save When]
These SPs select the content of the debugging information to be saved to the
5858
destination selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of
SC error codes.
SM Appendix
2: HDD, 3: SD Card
*CTL -
8-223
Engine Service Mode
G188/G189