Ricoh G188 Service Manual page 430

Engine Service Mode
Sets the pressure roller offset temperature. This value is one of the thresholds
to determine if the machine is at the heating roller target temperature during
warm-up.
Panel Off Mode 2:
Pressure
013
Sets the limit temperature of the pressure roller. This value is one of the
thresholds to determine if the machine is at the heating roller target
temperature during the warm-up.
Low Power: Pressure
014
Specifies the stand-by temperature for the pressure roller.
030 Plain: FC: Simplex
032 Plain: FC: Duplex
034 Plain: BW: Simplex
036 Plain: BW: Duplex
038 Thin: FC: Simplex
042 Thin: BW: Simplex
046 Thick 1: FC: Simplex
048 Thick 1: FC: Duplex
050 Thick 1: BW: Simplex
052 Thick 1: BW: Duplex
054 Thick 2: FC: Simplex
055 Thick 2: BW: Simplex
056 OHP: FC: Simplex
057 OHP: BW: Simplex
058 Special 1: FC: Simplex
G188/G189
* ENG [60 to 130 / 90 / 1 deg /step]
* ENG [60 to 130 / 90 / 1 deg /step]
*ENG
*ENG
[130 to 180 / P2c: 160, P2d: 165 / 1 deg
/step]
*ENG
*ENG
*ENG
[130 to 180 / P2c: 155, P2d: 160 / 1
deg/step]
*ENG
*ENG
*ENG
[140 to 190 / 175 / 1 deg /step]
*ENG
*ENG
*ENG
*ENG
[140 to 190 / 160 / 1 deg /step]
*ENG
*ENG
*ENG [120 to 190 / P2c: 165, P2d: 170 / 1
8-18 SM Appendix