Ricoh G188 Service Manual page 513

002 Paper Transfer: 2nd Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2551 is multiplied by these SP values.
2571
The paper leading edge area can be adjusted with SP2572.
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 2: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2572
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 2: Trailing Edge Correction] Thick 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2573
edge in each mode. SP2553 and SP2558 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2574.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
SM Appendix
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2mm/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
8-101
Engine Service Mode
G188/G189