Ricoh G188 Service Manual page 523

001 PTR:1st
003 PTR:TH4:1st
005 Sep DC:TH4:1st
007 Sep DC:TH4:1st
[Thick4:T Edge Cor] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2676
edge in each mode. SP2671 and SP2672 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2675.
001 PTR:1st Side
003 PTR:TH4:1st
005 Sep DC:TH4:1st
007 Sep DC:FINE:1st
[Thick4:TE:Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2677
plate at the paper trailing edge between the erase margin area and the image
area.
001 PTR:1st Side
003 PTR:TH4:1st
005 Sep DC:TH4:1st
007 Sep DC:FINE:1st
[Thick 4:Env Cor] Thick 4 Paper: MM Environment Coefficient Adjustment
2678
Adjusts the environment coefficient for each mode. When the environment is
SM Appendix
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 1 mm/step]
*ENG
*ENG
8-111
Engine Service Mode
G188/G189