Ricoh G188 Service Manual page 526

Engine Service Mode
001 PTR:1st
002 SeparatDC:1stSide
[Thick5:T Edge Cor] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2696
edge in each mode. SP2691 and SP2692 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2695.
001 PTR:1st Side
003 SeparatDC:1stSide
[Thick5:TE:Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2697
plate at the paper trailing edge between the erase margin area and the image
area.
001 PTR:1st
003 SeparatDC:1stSide
[Thick 5:Env Cor] Thick 5 Paper: MM Environment Coefficient Adjustment
2698
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2691 and SP2692 are multiplied by these SP values.
001 SeparatDC:1stSide
003 PTR:TH5:BW:1st
005 PTR:TH5:FC:1st
[Special1: Bias]
2751
Adjusts the DC voltage of the discharge plate for special paper 1.
Plain: 205 (P2c)/230 (P2d) mm/sec, Fine: 77 mm/sec
G188/G189
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 1 mm/step]
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG [1 to 60 / 22 / 1 %/step]
*ENG [1 to 60 / 11 / 1 /step]
*ENG
[1 to 60 / 1 / 1 /step]
8-114 SM Appendix