Ricoh G188 Service Manual page 397

Jam Code
Display
SP
Finisher Folder Motor:
7504 204
EUP
Finisher Exit Motor:
7504 205
EUP
Finisher Punch Motor:
7504 206
EUP (B805)
7504 220 MBX P. Feed 1: OFF
7504 221 MBX P. Feed 1: ON
7504 222 MBX P. Feed 2: OFF
7504 223 MBX P. Feed 2: ON
Finisher Exit No
7504 230
Response
Finisher
7504 231
Communication Error
SM Appendix
Description
Booklet stapler does not finish stapling
after a specified time.
Not used
Not used
Punch encoder sensor does not turn
on/off after the punch drive motor has
turned on.
Punch movement HP sensor does not
turn on/off after the punch movement
motor has turned on.
Paper position slide HP sensor does not
turn on/off after the paper position
sensor slide motor has turned on.
The mail bin lower relay sensor does not
detect paper from the main machine.
The mail bin lower relay sensor does not
turn off.
The mail bin upper relay sensor does
not detect paper from the main machine.
The mail bin upper relay sensor does
not turn off.
The machine does not get a paper exit
signal from the finisher.
The machine does not detect the
finisher.
6-9
Jam Detection
LCD
Display
-
-
R1-R4
TBA
TBA
TBA
TBA
-
-
G188/G189