Ricoh G188 Service Manual page 629

043 11g CTS to Self
044 11g Slot Time
045 WPA Debug Lvl
5842 [GWWS Analysis] DFU
001 Setting 1
002 Setting 2
5844 [USB]
Transfer Rate
001
Adjusts the USB transfer rate.
SM Appendix
This SP is displayed only when the
IEEE802.11 card is installed.
Determines whether the CTS self function
is turned on or off.
*CTL [0 to 1 / 1 / 1] 0: Off, 1: On
This SP is displayed only when the
IEEE802.11 card is installed.
Selects the slot time for IEEE802.11.
*CTL
[0 to 1 / 0 / 1] 0: 20 μm, 1: 9 μm
Selects the debug level for WPA
authentication application.
*CTL
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the
IEEE802.11 card is installed.
Default: 00000000 – do not change
Netfiles: Jobs to be printed from the
*CTL
document server using a PC and the
DeskTopBinder software
Adjusts the debug program modesetting.
Bit7: 5682 mmseg-log setting
0: Date/Hour/Minute/Second
*CTL
1: Minute/Second/Msec.
0 to 6: Not used
0x01: Full speed
*CTL
0x04: Auto Change
8-217
Engine Service Mode
G188/G189