Ricoh G188 Service Manual page 597

001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional]
Enables or disables the automatic print out without an accounting device. This
5167
SP is used when the receiving fax is accounted by an external accounting
device.
Fax Printing Mode at
001
Optional Counter Off
[CE Login]
5169
If you will change the printer bit switches, you must 'log in' to service mode with
this SP before you go into the printer SP mode.
001 CE Login
[By-pass Size Error Detection]
5179
Turns on or off the by-pass tray size error message.
001 -
[Size Adjust]
5181
Adjusts the paper size for each tray.
001 Paper TRAY 1
SM Appendix
[0 or 1 / 0 / - ]
*CTL 0: Automatic printing
1: No automatic printing
[0 or 1 / 0 / - ]
*CTL 0: Disabled
1: Enabled
[0 or 1 / 0 / 1/step]
0: OFF
1: ON (Paper size error message is
*ENG
displayed when the paper jam occurs due
to the wrong direction of set paper in
by-pass mode.)
*ENG [0 to 3 / 0 (EU/ASIA), 1 (NA) / 1 /step]
8-185
Engine Service Mode
G188/G189