Ricoh G188 Service Manual page 141

4. Put a sheet of paper [A] (A3/DLT) inside the machine as shown and on the floor.
The sheet of paper on the floor is used in a later step.
5. Release the harness [A] from the clamp (
then disconnect the harness.
Avoid touching these spring terminals [B].
6. Release the toner supply tube [C].
7. Remove the toner pump unit [A] (
SM
x 1 for YCM,
x 2)
4-27
Image Creation
x 2 for K) and hook, and
G188/G189