Ricoh G188 Service Manual page 585

003 Plain: C
004 Plain: Y
005 Thick 1: Bk
006 Thick 1: M
007 Thick 1: C
008 Thick 1: Y
009 Thick 2 & FINE: Bk
010 Thick 2 & FINE: M
011 Thick 2 & FINE: C
012 Thick 2 & FINE: Y
[HST Concentration Control: Set]
TD Sensor: Toner Concentration Control Setting
3710
Selects the toner concentration control method by HST memory, which is in the
TD sensor.
001 Control Method: Selection
[HST Concentration Control: Bk]
3711
Displays the factory settings of the black PCU.
001 Vcnt
002 Vt
003 Sensitivity: HL
004 Sensitivity: HM
005 Sensitivity: ML
006 Set Detection
SM Appendix
*ENG
*ENG
*ENG
*ENG
[0 to 200 / 100 / 1 %/step]
*ENG
*ENG
*ENG
*ENG
[0 to 200 / 100 / 1 %/step]
*ENG
*ENG
*ENG
[0 or 1 / 1 / - ] 0: Not Use, 1: Use
*ENG
[0 to 5 / 4 / 0.1 V/step]
*ENG
[0 to 5 / 2.5 / 0.1 V/step]
*ENG [1.22 to 3.77 / 2.1 / 0.01 V/step]
*ENG
[0 to 2.55 / 1.05 / 0.01 V/step]
*ENG
*ENG [0 to 5 / 1 / 0.1 V/step]
8-173
Engine Service Mode
G188/G189