Ricoh G188 Service Manual page 617

The certification update request has been received from the GW URL,
the GW URL was notified of the results of the update after it was
17
completed, but a certification error has been received, and the rescue
certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL
18
is being notified of the failure of the certification update.
CERT: Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification
1
has expired.
068
An SSL error notification has been issued. Issued after the certification
2
has expired.
Notification of shift from a common authentication to an individual
3
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID
083 Firmware Up Status
084 Non-HDD Firm Up
085 Firm Up User Check
SM Appendix
The ID of the request for certification.
Displays the status of the firmware update.
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
This SP setting determines if the operator can
confirm the previous version of the firmware
before the firmware update execution. If the
8-205
Engine Service Mode
G188/G189