Ricoh G188 Service Manual page 622

Engine Service Mode
Operation Error,
Incorrect Setting
Error Caused by
Response from GW
URL
G188/G189
Inquiry, registration attempted without
-12002
acquiring device status.
Attempted registration without execution
-12003 of an inquiry and no previous
registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
@Remote communication is prohibited.
-12005 The device has an Embedded RC
gate-related problem.
A confirmation request was made after
-12006 the confirmation had been already
completed.
The request number used at registration
-12007 was different from the one used at
confirmation.
Update certification failed because
-12008
mainframe was in use.
Attempted dial up overseas without the
-2385 correct international prefix for the
telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 RCG device not managed
8-210 SM Appendix