Ricoh G188 Service Manual page 649

Displays the signals received from sensors and switches of the finisher. (
"Input Check Table" in this section)
6142 [FIN (JAK) INPUT Check]
Displays the signals received from sensors and switches of the finisher. (
"Input Check Table" in this section)
6143 [FIN (TIG) OUPUT Check] Finisher (B793) Output Check
Activates each devices in the finisher. (
6144 [FIN (KIN) OUPUT Check] Finisher (B408) Output Check
Not Used in this machine.
6145 [FIN (EUP) OUPUT Check] Finisher (B805) Output Check
Displays the signals received from sensors and switches of the finisher.
( "Output Check Table" in this section)
6147 [FIN (JAK) OUPUT Check]
Activates each device in the mail bin unit. ( "Output Check Table" in this
section)
6148 [Jogger Fine Adj]
001 A3T
002 B4T
003 A4T
004 A4Y
005 B5Y
SM Appendix
"Output Check Table" in this section)
*ENG Fine Adjust Output Jogger Unit Fences
This SP corrects the distance between the jogger
fences and the sides of the stack when the output
jogger unit attached to the side of the machine jogs
sheets as they exit the finisher.
+ Value:
Increases distance between jogger fences and the
sides of the stack.
8-237
Engine Service Mode
G188/G189