Ricoh G188 Service Manual page 305

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
See SC 230 for troubleshooting details.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
FGATE ON error: C
The PFGATE ON signal does not assert within 5 seconds after
236 D
processing the image in normal job or MUSIC for start position [C].
See SC 230 for troubleshooting details.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
FGATE OFF error: C
The PFGATE ON signal still asserts within 5 seconds after
237 D
processing the image in normal job or MUSIC for end position [C].
The PFGATE ON signal still asserts when the next job starts.
See SC 230 for troubleshooting details.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
240 C LD error: Bk
241 C LD error: Y
242 C LD error: M
243 C LD error: C
The BCU detects LDB error a few times consecutively when LDB unit
turns on after LDB initialization.
- -
Worn-out LD
Disconnected or broken harness of the LD
1. Replace the harness of the LD.
SM Appendix
Service Call Conditions
3-9 G188/G189