Ricoh G188 Service Manual page 60

Printer Installation
Item
Meter Click
SP5-930-001
Charge
Meter Click
Charge: SP5-930-010
PCU
Meter Click
Charge:
Image SP5-930-014
Transfer Belt
Unit
Meter Click
Charge: SP5-930-016
Fusing Unit
Counter
SP5-045-001
method
G188/G189
SP No.
Enables or disables Meter Click
Charge.
When enabled:
The counter menu shows
immediately after you push the
"Menu" key. The "Counter
Method" (SP5-045) sets the
type of the counter.
You can print the counter from
the counter menu.
When disabled:
The counter menu does not
show.
Enables or disables the PM alert for
the PCUs.
If this SP is enabled, an alert
message is displayed when the
PCUs need to be replaced.
Enables or disables the PM alert for
the image transfer belt unit.
If this SP is enabled, an alert
message is displayed when the
image transfer belt unit needs to be
replaced.
Enables or disables the PM alert for
the fusing unit.
If this SP is enabled, an alert
message is displayed when the
fusing unit needs to be replaced.
Specifies if the counting method
used in meter charge mode is
based on developments or prints.
Function
2-20
Default
"0": OFF
"1": No alert
"1": No alert
"1": No alert
"1": Prints
SM