Ricoh G188 Service Manual page 589

Pixel Count After
005
Replacement
008 Coefficient
Notice Setting
011
NOTE:
If the toner collection bottle has been replaced before the machine detects
used toner near full when this setting is set to "0", the machine cannot detect
toner collection bottle near full. In that case, set SP3-902-017 to "1".
Day Threshold: Toner
Collection bottle:NF
012
Sets the threshold days for the near-full display. The near-full of the toner
collection bottle is displayed after the toner collection full sensor has detected
the actuator in the toner collection bottle.
Total:Toner Collection
013
Bottle
Mechanism Full
014
Detection Date
[Toner Collection Bottle Full Detection]
3900
Turns toner collection bottle full detection on or off.
001 ON/OFF Setting
3901 [New PCU Detection]
SM Appendix
Displays the pixel counter after
*CTL replacement of toner collection bottle.
[0 to 200000 / - / 1 cm
*ENG [0.5 to 1.5 / 1 / 0.1 /step]
Enables or disables the calling for
@Remote.
*ENG [0 or 1 / 1 / - ]
0: Enable @Remote calling
1: Disable @Remote calling
*ENG
[1 to 30 / 5 / 1 day/step]
Displays the total amount of the used
*ENG toner.
[0 to 999999999 / 1 / 1]
Displays the date of the full detection
*ENG
fot the toner collection bottle.
[0 or 1 / 1 / - ]
*ENG
0: OFF, 1: ON
8-177
Engine Service Mode
2
/step]
G188/G189