Tray Heater (Standard Tray); Installation Procedure - Ricoh G188 Service Manual

Tray Heater (Standard Tray)

2.11 TRAY HEATER (STANDARD TRAY)

2.11.1 INSTALLATION PROCEDURE

1. Remove trays 1 and 2 from the machine.
2. Remove the connector cover [A] (
3. Connect the connector [B] of the heater to the connector of the main machine.
4. Install the heater [C] inside the machine (
5. Reassemble the machine.
6. Attach the on/standby decal [D] to the right-hand side of the main power switch.
G188/G189
x 1).
x 1)
2-54 SM