Ricoh G188 Service Manual page 609

Rev. 05/21/2009
Count
Sets the number of consecutive paper jams required to initiate a call. This
setting is enabled only when SP5508-004 is set to "1".
Door Open: Time Length
013* Sets the length of time the door remains open before the machine initiates a
call.
This setting is enabled only when SP5-508-004 is set to "1".
[SC/Alarm Setting]
With NRS (New Remote Service) in use, these SP codes can be set to issue
5515
an SC call when an SC error occurs. If this SP is switched off, the SC call is
not issued when an SC error occurs.
001 SC Call
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
006 Communication Test Call
007 Machine Information Notice
008 Alarm Notice
009 Non Genuine Tonner Alarm
010 Supply Automatic Ordering Call
011 Supply Management Report Call
012 Jam/Door Open Call
⇒
5801 [Memory Clear]
001 All Clear
SM Appendix
[3 to 30 / 10 / 1 /step]
*CTL -
[0 or 1 / 1 / - ]
0: Off
1: On
[0 or 1 / 1 / - ]
0: Off
1: On
(Refer to IMPORTANT NOTE in Sect. 5.4)
Resets all correction data for process control and
8-197
Engine Service Mode
G188/G189