Ricoh G188 Service Manual page 596

Engine Service Mode
5126 [F Size Original Setting]
001 Selects F size original setting.
5127 [APS Mode]
001 This program disables the APS.
5128 [Code Mode With Key/Card Option] *CTL -
001 DFU
[Paper Size Type
5131
Selection]
The program selects a paper size system from the following alternatives: the AB
001
system (0), the LT system (1), and the AF system (2).
5148 Size Detection Off
0: Detecte
1: Not Detecte
[By-Pass Length
5150
Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
001 Normally the paper length for sub scanning paper from the by-pass tray is
limited to 600 mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method]
G188/G189
[0 to 2 / 0 / 1 /step]
0: 8 1/2" x 13" (Foolscap)
*ENG
1: 8 1/4" x 13" (Folio)
2: 8" x 13" (F)
*CTL [0: Not disabled/ 1: Disabled]
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
*CTL [0: OFF/ 1: ON]
*CTL [0: OFF/ 1: ON]
*CTL [0: Soft Key Set/ 1: Hard Key Set]
8-184 SM Appendix