Ricoh G188 Service Manual page 462

Engine Service Mode
2118 [Skew Adjustment]
001 Execute: M
002 Execute: C
003 Execute: Y
[Skew Adjustment Display]
2119
Displays the current skew adjustment value for each skew motor.
001 M
002 C
003 Y
[Thick Paper Skew Adj] Not used
2120
Selects the skew adjustment value for thick paper.
001 On/Off
[ID Sensor Check Result] DFU
Displays the results of the ID sensor check.
2140
Bk, M, C, Y: ID sensors for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Bk
002 M
003 C
G188/G189
*ENG Changes the current skew adjustment
values to the values specified with SP2117.
*ENG
These SPs must be used when a new laser
optics housing unit is installed or when
SC285 occurs. For details, see "Laser
*ENG
Optics Housing Unit" in the "Replacement
and Adjustment" section.
*ENG
[–50 to 50 / 0 / 1 pulse/step]
*ENG
*ENG
[0 or 1 / 1 / 1 /step]
*ENG
0: Off, 1: On
*ENG [0 to 1024 / 0 / 1/step]
*ENG
*ENG
8-50 SM Appendix