Ricoh G188 Service Manual page 611

016 MIRS Setting
017 CCS
018 SRM Memory Clr
019 LCS
020 Web Uapli
021 ECS
[FreeRun]
Performs a free run on the copier engine.
The machine starts free run in the same condition as the sequence
5802
of A4/LT, A3 or A4 SEF printing from the 1st or 2nd tray. Therefore,
the correct paper should be loaded in the 1st tray or 2nd tray, but
paper is not fed.
The main switch has to be turned off and on after using the free run
mode for a test.
001 TRAY1: A4LEF: FC
002 TRAY2: A3: FC
003 TRAY2: A4SEF: FC
5803 [Input Check]
5804 [Output Check]
5805 [Anti-Condensation Heater]
SM Appendix
Service) settings.
Initializes the MIRS (Machine Information Report
Service) settings.
Initializes the CCS (Certification and
Charge-control Service) settings.
Initializes the SRM (System Resource Manager)
settings.
Initializes the LCS settings.
Initializes the web user application settings.
Initializes the ECS settings.
-
-
-
-
- See "Input Check Table" in this section.
- See "Output Check Table" in this section.
8-199
Engine Service Mode
G188/G189