Ricoh G188 Service Manual page 624

Engine Service Mode
5828 [Network Setting]
IPv4 Address
001 (Ethernet/IEEE
802.11)
1284 Compatibility
050
(Centro)
052 ECP (Centro)
065 Job Spooling
Job Spooling Clear:
066
Start Time
Job Spooling
069
(Protocol)
G188/G189
*CTL
-
This SP allows you to confirm and reset the IPv4
address for Ethernet and wireless LAN (802.11):
aaa.bbb.ccc.ddd
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
This SP is activated only when SP5-828-50
is set to "1".
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
Treatment of the job when a spooled job exists at
power on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
Validates or invalidates the job spooling function for
each protocol.
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: (Reserved)
8-212 SM Appendix