Ricoh G188 Service Manual page 687

When a fax on the document server is printed, the F: counter increments.
8 031 T:Pjob/DesApl
8 034 P:Pjob/DesApl
8 037 O:Pjob/DesApl
When documents already stored on the document server are printed, the count for the
application that started the print job is incremented.
When the print job is started from a network application (Desk Top Binder, Web Image
Monitor, etc.) the L: counter increments.
T:FIN Jobs
8 061
These SPs total the finishing methods. The finishing method is specified
by the application.
P:FIN Jobs
8 064
These SPs total finishing methods for print jobs only. The finishing method
is specified by the application.
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
8 067
application, over the network. The finishing method is specified by the
application.
8 06x 1 Sort
8 06x 2 Stack
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
SM Appendix
*CTL These SPs reveal what applications were
used to output documents from the document
*CTL
server.
[0 to 9999999/ 0 / 1]
*CTL
*CTL [0 to 9999999/ 0 / 1]
*CTL
[0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L:
counter increments. (See SP8 066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode
8-275
Engine Service Mode
G188/G189